Видеокамера SW option for HDX 6000, 1080p People Max resolution. Max fps: 30 RX and 15 TX

Видеокамера Component video cable. 3 x BNC (M) to 3 x BNC (M), 25 ft.

Видеокамера Polycom Touch Control for use with HDX 6000, 7000, 8000, and 9000 series codecs with software version 3.1.1 or later and Touch Control 1.7 or later. Requires PoE network connection or optional externa

Видеокамера Monitor adapter cable - DVI-A(M) to 5-BNC(F), 1', 305mm.В Use to break out DVI from codec (DVI-I connector) to YPbPr for component display device.

Видеокамера UC Board. Sensor+stylus bundle with USB hub. Compatible with HDX 7000 Rev C and D, 8000 Rev B, 9000-720 and 9000-1080 running HDX software revision 3.0.3 or later. Requires dual monitors uses 2nd disp

Видеокамера Camera adapter. Converts HDCI(M) to Svideo(F) and DB15(F).В Use to connect PowerCam Plus camera to HDX codec as primary or secondary camera

Видеокамера UC Board. Sensor+stylus bundle. Compatible with Group Series 300, 500, 550 & 700 running software revision 4.1.3 or later. Requires dual monitor systems, LCD displays supported.

Видеокамера Monitor cable -В DVI-A(M) at codec to VGA(M), 3m.В Used to connect DVI from codec (DVI-I connector) to VGA display device input.

Видеокамера HDX 7000/8000 upgrade kit. Hardware upgrade for HDX 7000 (rev A or rev B) and the HDX 8000 (rev A). Requires installation by certified service partner. HDX must have software version 2.5.0.8 or later.

Видеокамера Monitor cable, DVI-D(M) to DVI-D(M), 3m. Used to connect codec (DVI-I connector) to DVI-D display device input.

Видеокамера HDX Software upgrade version 3.1;for all Polycom HDX systems.

Видеокамера CLink 2 Crossover cable, 50-feet.В Shielded, plenum rated.В Links any two CLink 2 devices that use RJ-45 type sockets.

Видеокамера EagleEye View Main Camera. Compatible with QDX, CX7000 or HDX Series HDCI inputs. Microphones active only on HDCI input 1 and without CLink 2 connection. Includes 3m cable.

Видеокамера UC Board, Spare Stylus. Includes 4 replacement nibs.

Видеокамера HDX 7001 upgrade kit. Hardware upgrade for HDX 7001 systems to convert to an HDX 7000 rev C codec. Requires installation by certified service partner. HDX must have software version 2.5.0.8 or later.

Видеокамера Auxiliary power supply for PowerCam (with 1457-50526-001 adapter), PowerCam Plus, EagleEye HD/II/III/View/QDX camerasВ 12Vdc/3.3A,90-264VAC,NEGATIVE CENTER PIN,2.5mm pin/5.5mm barrel.В Replaces 1465-5

Видеокамера Software option for "1080p Resolution", to enable 1080 encode/decode. Supported on HDX 7000 revC and revD; HDX 8000 revB; HDX 9000/9006 revB systems.

Видеокамера Power supply for EagleEye Director base, 115V/230Vin,12V/5A OUT.В Order AC power cord separately.

Видеокамера EagleEye 3 Camera. Compatible with QDX, CX7000 or HDX 6000 & 7000 main HDCI input and 8000 and 9000 series main and auxiliary HDCI inputs with software version 3.0.1 or later. Includes 10m cable and r

Видеокамера HDCI(M) to HDCI(M) 3m camera cable for EagleEye HD/II/III connection to Polycom HDX & RealPresence Group Series, 2nd HDX HDCI input requires external power supply (1465-52748-040).В Limited support fo